Section _ Construction and formation of field effect transistors (Mosfet)

Interesting understanding and study of  the structure (field effect transistors) 

Researcher  and author: Dr.   (   Afshin Rashid)



Note: MOSFETs conduct current in their conduction region, which is called the "channel." By applying the appropriate voltage to the gate, this conduction channel can be made larger or smaller. Applying this gate voltage to the transistor will affect the electrical characteristics of the channel and induce an electric field around the gate base. This is why this transistor is called a field effect transistor.

The MOSFET transistor  is the core of integrated circuits and because of its very small size it can be designed and manufactured on a single chip.  The MOSFET is a four-terminal device with source (S), gate (G), drain (D) and base (B) terminals.  The base of the MOSFET is often connected to the source terminal, thus making it a three-terminal device like a field effect transistor. 


MOSFETs are used in many electronic circuits. They are the most common type of transistor and can be used in both analog and digital circuits. In wide-ranging circuits, a MOSFET transistor allows us to use a relatively low voltage at the gate to modulate the current from drain to source.  Two basic types of MOSFETs are used to make discrete circuits.



A MOSFET is a semiconductor device that is widely used in various electrical and electronic circuits to switch and amplify electronic signals in electronic devices. The Metal Oxide Semiconductor Field Effect Transistor, or  MOSFET  ,  is an excellent choice for small-signal linear amplifiers because its input impedance is very high, making it easy to bias. For a MOSFET to have linear amplifying properties, unlike a bipolar transistor, it must operate in the saturation region. However, like a bipolar transistor, it must be biased around a fixed central operating point.

Researcher  and author: Dr.   (   Afshin Rashid)

Specialized PhD in Nano-Microelectronics