DND nanostructure is an example of nanoparticle proliferation in the active medium (PhD in nano-microelectronics)
Researcher and author: Dr. ( Afshin Rashid)
Note: The DND nanostructure is an example of the proliferation of active wires for its production, such as polymers .
DND is an example of an active wire. The DND structure is well known and is automatically generated by the multiplication of nanowires. In order to use DND to calculate the current in terms of voltage, a distance of 8 nm is assumed between the two platinum electrodes, so by applying a voltage, the current can be calculated. The point to be drawn from the reaction is that the current diagram is asymmetric in terms of voltage , meaning that current is not allowed to pass between 1 and 2 volts, for example, while current can pass between 2 and 1, and this means That DND can perform the rectification operation .
There are three theories about conducting through DNA, one is that DND is a semiconductor with a very large gap. Another is that DND is a semiconductor with a small gap and also that DND has a metallic property. The point is that DND is a very complex substance whose environmental conditions can greatly affect its properties. One of these environmental conditions is the presence of water, DNDs that are in a dry environment with DNDs that are in a humid environment. It is very different. Therefore, according to the local conditions governing DND, it is not possible to give a definite conclusion about whether DND is metal or semi-metal, but what is certain is that DND is a semiconductor with a large gap. Normally there are ions that can be manipulated to determine the conductive properties of DND Change that can be hoped that with the addition of ions to even make it to the metal converted Another interesting fact is that we can from DND to use as a template and the locations specified on the DND Series metals and put up a metal wire around the DND To be created. In this case, DND should be used as a template to hold the desired wire.
It is also possible to check the stability of DND according to the local conditions of the system. DND is routed in two specific directions. When the DND is considered as a current conductor, it can pass the current once in the direction parallel to its axis and once it can pass the current perpendicular to its axis. Now, for the direction in the direction perpendicular to the axis, it can be assumed that STM The carbon nanotube molecule is placed on top of the DND. The current enters the STM tip perpendicular to the existing game pairs. This can be used both as an experiment to see the DND image and to measure the flow rate of the game pairs. Calculated the conduction of AT and CG (pairs of bases present in the DND helix). DND can be used as a tool in the production of nanoelectronic products, since DND is naturally present in nature and in the cells of living organisms, it can be used in the production of other nanotechnology products such as nanomotors. The control and stability of DND is also possible due to its inherent and local properties and is worth considering.
Conclusion DND nanostructures are an example of active wire amplification
1- What is certain is that molecular electronics has a bright future and is growing and evolving at a very fast pace. Therefore, it requires special attention.
2- The practical results of the growth and development of nanotechnology branches such as nanoelectronics will lead to the construction of equipment that is very different from the past and will be a completely new generation with unique capabilities.
Researcher and author: Dr. ( Afshin Rashid)
PhD in Nano-Microelectronics